Product Description

• Fully compatible with ps2 v3-v16 PAL/USA/Jap.
• Support new versino GH-051-02 and GH-051-51.
• Upgrade from modbo3.0, comes with the original 100% v1.93 firmware, but it isn't upgradeable.
• Comes with a mini size board,and the wiring point order is good for installation.
• AUTOMATIC SELECTION for PS2/PS1/DVD SUPPORTS.
• DVD Region Free Incorporated !!
• Software selectable "PS2 Quick Load" option. (To skip PS2 logo and Quick boot PS2 Games!!)
• Software selectable "PSX Quick Load" option. (To skip PS1 logo and Quick boot PSX Games!!)
• Easy to Install. (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13)
• CPLD Chip (3.3V power supply) based IC for enhanced stability
• AUTOMATIC "MACROVISION=OFF" ON ALL PS2 FROM V3 TO V16 WITHOUT ADDITIONAL WIRES !!
• AUTOMATIC "GREEN FIX" (No more need to change the cable to see your DVD movies on the PS2!!)
• Import Games Fix (All PSX import games are played at FULL SCREEN and FULL COLOR !!)
• STEALTH-Mode (The Modchip can be switched off and becomes invisible to Online Gaming)
• Sleep-Mode (The Modchip will switch off itself after boot)
• Supports DVD-9 games!!
• PLAYS ALL THE CD'S and DVD'S Games (both, Import or Backup's)
• SUPPORTS MULTI-DISK GAMES !!
• SUPPORTS ANTI-MOD PS1 GAMES !! (Only for V9 - V16 PS2)
• Very Reliable (All the Modchips are 100% tested before delivery)
• Very Stable (Thanks to the sleep mode the IC will never Overheat)
• CD Lens Safe (Avoid CD lens damage by sending un-necessary signal to the Drive Controller)
• Support dev1 and dev2 for memorycard booting!

Product New Function

Press TRIANGLE + CIRCLE to enter the configuration menu.
PS2 SCREEN FIX : OFF : Disables PS2 video fix.
COLOR : Games will be output on their original video mode (PAL/NTSC)
with color correction applied to match your PS2 region.
PAL : Force video mode to PAL
NTSC : Force video mode to NTSC
PAL60 : Force all games to NTSC with color correction.
Games will run faster but screen might need adjusting.
Y SCREEN FIX : OFF : Y screen position fix is disabled.
AUTO : Y position fix enabled with default settings.
Should be fine for most television sets.
+/- N : Fine tune Y position.
Positive values move the screen down, Negative values move it up.
PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix
PSX MULTI DISK : ON/OFF : Enable/Disable PSX multi disk support
MC16 PATCH : ON/OFF : Enable/Disable D4TEL memory card support
ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch
MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch
GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies
DVD VIDEO REGION : 1..8 : Selects the DVD player region.
Use it to match the corresponding region on RCE protected discs.
DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch
BOOT MODE : AUTO : Normal behaviour. All discs wil autoboot.
FAST : FastBoot.
Same as pressing SELECT on boot.
INFMAN : Execute Infinity Manager on mc0:
Same as Pressing TRIANGLE on boot.
DEV1 : Execute BOOT.ELF on mc0:
Same as Pressing R1 on boot.
DEV2 : Execute BOOT.ELF on HDD
Same as Pressing L1 on boot.
DVDV : Force DVD video mode.
Same as Pressing CIRCLE on boot.

PAD DETECT TIME : 2..10 : Select time to wait for connected pad on boot.
Only useful if pad is left unconnected.
BOOT LOGO : ON/OFF : Enable/Disable Matrix boot logo.
DEFAULT LANGUAGE : LANG : Default language to use for FastBoot/InfMan/Dev1 mode.

------------------------------------
STANDARD OPERATION FOR THE modbo 750:
------------------------------------

BOOT OF PS2 / PS1 / DVD MOVIES:
-------------------------------
- Insert the disc inside the PS2.
- The infinity will recognize the kind of disc you inserted and select
the appropriate boot system.
TURNING OFF THE INFINITY:
-------------------------
- Press START on joypad 1 until the writing "DISABLED" will appear on screen.
- Press reset once.
- The Infinity is now disabled until PS2 is turned off to Standby Position.
FAST BOOT OF PS2 GAMES:
-----------------------
- Press SELECT on joypad 1.
- PS2 Logo will be skipped and game will boot directly.
FORCING PS1/DVD MODE:
---------------------

- Press CIRCLE on joypad 1.
(This option is only needed just in case someone needs to force the PS2
to boot in PS1/DVD mode).
FORCING AUTO MODE:
---------------------
- Press CROSS on joypad 1.
Useful to temporarily skip the default boot mode when set to something
other than AUTO.
LAUNCHING MEMORY CARD APPLICATIONS:
-----------------------------------

- Press TRIANGLE on joypad 1.
- If installed, the Infinity Manager will appear and show a list of
installed applications.

-or-

- Press R1 on joypad 1.
- If installed, the default boot application (mc0:BOOT/BOOT.ELF) will
be launched.

LAUNCHING HDD APPLICATION (DEV2 MODE):
--------------------------------------

- Press L1 on joypad 1.
- If correctly installed, the default application will be executed from the HDD.