SWQ-C Type Triple Capture Net Emitter

Product Characteristics

The capture products is triple net transmitter, which can be shoot three net continuous in a short time, so that it can capture one or more targets according to needs. It is widely applicable to the enforcement of the Public Order applies to the railway, mining, resources conservation areas and factories, banks, shopping malls and public entertainment places and public security work in catching the need to stop or arrest criminal suspects, when he entered the effective range of launchers, targeting deduction as long as the trigger fired launched catch network, which can capture target

Main parameters

• Use of environmental temperature: -30 < T < +40 degrees Celsius
• Network-Size: 3.2M x 3.2M 4.0M x 4.0M
• Maximum range: 15M
• Capture distance: 5-15M
• NW: 1.5Kg
• Gross: 3.65kg

Use Method

3-1. As shown in Figure 1,switch the safe button on "close", The right hand grip transmitter handles, Index finger press safe screw that use in fixed safe button, left hand slide safe button in "close" location.

3-2.Use two fingers pull bullet hole absorption then get it out.

3-3.Left hand hold combined net barrel, right hand hold hand grip and rotate make the block shells tune aim bullet hole, then load block shell, projectile body till three block shells tune is loaded.

3-4.Fill in bullet hole absorption, left hand hold combined net barrel, right hand hold grip and rotate to any location that locate shoot.

3-5.Percussion the location of firing pin

Left hand hold combined net barrel or grip, right hand catch pull cover back till the firing pin that be driven is locked, then loose hand, make the pull cover reset automatic.

3-6.Shoot the net

When capture the target, switch the safe button on"open" the method is the same as 3-1, right hand hold grip aim to the head of target, pull the trigger, shoot the first net. Then rotate the net tune to other location that locate shoot, as the 3-4 method locate firing pin again, pull the trigger, shoot the second net, the same method can shoot the third net.

Continued use of the transmitter

    When you shoot the first, second net even the third one, it may re-load the net and projectile body, make the transmitter can be used again.

4-1.Unload Block shells, shell case

As 3-1 method, switch the safe button on "close", take out bullet hole absorption like 3-2 method, rotate combined net barrel, make block shells tune aim to bullet hole, then use the cross screw insert into the launch hole of guide block, push block shells, shell case out, rotate combined net barrel continuous, push out other block shells and shell case as the same way.

 4-2. Reuse Block shells

In order to use the Block shells that had been used, need to separate the unload block shells and spent shell case, as shown in figure 2, put the block shells that load spent shell case into special off bombs nut, then fix by special off bombs screw, push the spent shell case out by special off bombs stick last.

4-3. Network load

Spread and straighten out the net, according to the four guided head of net's relative position insert a special plastics template of the four hole respective, make the entire network droop natural, then hold up the template by one hand, put the net end into net tube first and put all the net into net tube by the other hand. Then take four guided head according to the relative position of template inserted guide stand's four emitter holes orderly, finally cover the round rubber cap. Complete other load as the same way.

Note

5-1.When installation of the network, the network must be straightened out and to ensure that the four-seeker and the relative position on the template and insert fired four guided Block Hole agreement.

5-2.In order the safe, the safe button must switch "close" as the follows:

A. Not in use transmitter;

B. Before shoot the net;

C. Take out the block shells, shell case or load net.

5-3.Not to use transmitter, loaded prohibited missile, which has been put into not being used must be promptly removed.